Saturday, September 10, 2011

What is "Depth-of-Field"?

We photographers are always throwing around photo-speak terms, figuring that everyone knows what we're talking about. Some of these concepts can be baffling to the non-photographer, but that doesn't minimize their importance. Depth-of-Field is one of these.  In a nut-shell, depth-of-field describes the degree of acceptable sharpness in an image beyond, and in front of, the actual point of focus. An image with deep depth-of-field -- in a landscape, say, or a retracted smile -- looks sharply focused throughout. One with shallow depth-of-field, as in a portrait, will have a sharply defined subject standing out against a soft, blurry background. So it is something we can control and manipulate. With few exceptions, in intraoral photography we want as much depth-of-field as we can, otherwise our pictures end up with a somewhat "out of focus" appearance.
Look at these two diagrams:


Picture your macro lens -- probably it's maximum aperture (f/stop) is f2.8. That's as large as the lens opening can go. Its minimum aperture is f22 or f32; its smallest opening. Notice that when you shoot "wide open" you get very little depth-of-field, an effect even more pronounced with a macro lens. Depth-of-field increases as the size of the lens opening (actually its diaphram) decreases. Let's look at these samples:


Taken at widest opening, f/2.8 with my 100mm Macro

Taken at f8

Taken at f/32

In each case I was focusing on the very same spot, the 6th shade tab. There is practically no depth-of-field at f2.8, so although the tab I focused on is sharp as a tack, the image overall looks out of focus. At f8 we see a good deal more sharpness, but still a lot of fall-off at the extreme front and back. But at f32, the image overall looks acceptably sharp.
When I teach my workshops, I recommend that every shot be made at f32. We let our TTL flash do all the work of giving us correct exposure each time, and so we can be confident that all of our intraoral imaging will look nice and sharp. It's also a lot easier, and less error-prone, than fiddling around changing our lens setting with each shot!

Make sense? Drop me note. A sharp one, please!

2 comments:

  1. I have 100mm Canon macro lens 1:2.8 and a new EOS Rebel T2i. When I use the apature setting, especially at f32 but even half way, the shutter is slow and the picture is out of focus if I move in the least. This wasn't a problem with an older canon camera that broke. How do I set up this camera and flash? The flash is a macro ring lite MR-14EX.

    Thanks
    Eric Ballou

    ReplyDelete
  2. You need to set the camera at M manual, not Av. When you are set at M you can then manually select an appropriately fast shutter speed (usually around 1/200th) and set the aperture at f/32. Your MR-14 flash will reliably give you perfect exposure, even at ISO 100, of all your intraoral macro shots.
    When the camera is set at Av, it will not select a shutter speed at f/32 that is sufficient for accurate hand-held shooting.
    Hope this helps!
    Dave

    ReplyDelete